Reply to thread

Message

<blockquote data-quote="Lurius" data-source="post: 2103436" data-attributes="member: 564618">I finished up installing edead v1 on my trucks floor, as well as brownbread(b quiet ultimate). I used a bit of spectrum sludge as well, and am in between coats of edead v3 right now. I just did a search on the forums and all I found were a bunch of negative comments on all of ED&#039;s deadening products. Whats the deal?I have used fatmat, brownbread, dynamat extreme, and now edead v1 and cant say a single bad thing about any of them really. Fatmat the worst definantly, but its still holding out with no problems after 9 months now(including this 100+ summer here in texas). I would totally use edead and brownbread again, they both stuck with no problem, were easy to apply.Spectrum sludge went on amazingly, just grab a handfull and spread it. dried mostly overnight, with the exception of a couple small spots that its a little thick, but they will be fine by this afternoon.The edead v3 is going on really nicely, drying plenty fast, and a little bit is going a long way. I had 1 full gallon of it when I started, covered about 12 sq foot so far with one nice layer and it is still 4/5&#039;s full.So again, ive gotta ask, whats the deal with people picking on edead, and ED&#039;s deadening products?Not trying to start a pointless arguement here, I just want to hear real reasons people arent liking it, from people who have actually used it. All ive found in the search engien is negative comments, no real reasons given.-Lurius</blockquote>

[QUOTE="Lurius, post: 2103436, member: 564618"] I finished up installing edead v1 on my trucks floor, as well as brownbread(b quiet ultimate). I used a bit of spectrum sludge as well, and am in between coats of edead v3 right now. I just did a search on the forums and all I found were a bunch of negative comments on all of ED's deadening products. Whats the deal? I have used fatmat, brownbread, dynamat extreme, and now edead v1 and cant say a single bad thing about any of them really. Fatmat the worst definantly, but its still holding out with no problems after 9 months now(including this 100+ summer here in texas). I would totally use edead and brownbread again, they both stuck with no problem, were easy to apply. Spectrum sludge went on amazingly, just grab a handfull and spread it. dried mostly overnight, with the exception of a couple small spots that its a little thick, but they will be fine by this afternoon. The edead v3 is going on really nicely, drying plenty fast, and a little bit is going a long way. I had 1 full gallon of it when I started, covered about 12 sq foot so far with one nice layer and it is still 4/5's full. So again, ive gotta ask, whats the deal with people picking on edead, and ED's deadening products? Not trying to start a pointless arguement here, I just want to hear real reasons people arent liking it, from people who have actually used it. All ive found in the search engien is negative comments, no real reasons given. -Lurius [/QUOTE]

Verification