Reply to thread

Message

<blockquote data-quote="Prowler573" data-source="post: 1370996" data-attributes="member: 561023">I&#039;ll assume that you&#039;re driving those coaxials with the head unit? Were it me I&#039;d go for bigger amplification for that R....I&#039;d imagine on 140 watts it&#039;s somewhat starving. On the flipside certainly going with some rear fill and amping all your interior speakers could make a dramatic difference in your system as well. I&#039;ll likely get flamed for not advising you to avoid rear fill like the plague but c&#039;est la vie. Were it me, though, I&#039;d go with bass amplification &#039;cause I&#039;d wager you&#039;re not using half that R&#039;s potential with under 150 watts. Several different potential methods.A) Use &#039;Y&#039;-splitters to turn your single set of RCA outs into multiple sets.B) Use the single set of RCA outs for one amp and use a LOC (Line Output Converter) coming off of the speaker outputs for another amp. If you attach the LOC to the front speaker outputs you can still retain fadar functionality.C) If one of your amps has inbuilt preamp outputs then daisy chain the other amp off of the first one.Don&#039;t know any others right offhand.Hope this helps at all //content.invisioncic.com/y282845/emoticons/thumbsup.gif.3287b36ca96645a13a43aff531f37f02.gif</blockquote>

[QUOTE="Prowler573, post: 1370996, member: 561023"] I'll assume that you're driving those coaxials with the head unit? Were it me I'd go for bigger amplification for that R....I'd imagine on 140 watts it's somewhat starving. On the flipside certainly going with some rear fill and amping all your interior speakers could make a dramatic difference in your system as well. I'll likely get flamed for not advising you to avoid rear fill like the plague but c'est la vie. Were it me, though, I'd go with bass amplification 'cause I'd wager you're not using half that R's potential with under 150 watts. Several different potential methods.A) Use 'Y'-splitters to turn your single set of RCA outs into multiple sets. B) Use the single set of RCA outs for one amp and use a LOC (Line Output Converter) coming off of the speaker outputs for another amp. If you attach the LOC to the front speaker outputs you can still retain fadar functionality. C) If one of your amps has inbuilt preamp outputs then daisy chain the other amp off of the first one. Don't know any others right offhand. Hope this helps at all [IMG]//content.invisioncic.com/y282845/emoticons/thumbsup.gif.3287b36ca96645a13a43aff531f37f02.gif[/IMG] [/QUOTE]

Verification