Reply to thread

Message

<blockquote data-quote="Lexicon740iL" data-source="post: 8026605" data-attributes="member: 649368">I will check out that unit. Someone else recommended it on another thread of mine.Thats what I&#039;m talking about man! a good response addressing several of the questions asked.I was hoping you would reply.I&#039;ve read several posts by you and notice you are a supporting vendor here.I will def. send my business your way for going out of your way to help me with input on equiptment and system intrgration for my project.You mentioned rear deck a couple of times... The BWM X5 is a SUV so no rear deck.The rear doors have a 2.5&quot; midrange and 6&quot; midbass driver. Are you saying leave the OEM midrange in place and just swap out the midbass driver with an offering from PHD or DLS? and run them both off of OEM DSP amp power?Then for the fronts. The midrange in the dash is 2.5&quot; and then a 20mm tweeter and 6&quot; midbass drive in the door.Which set&#039;s would your recommend? Front stage and rear doors?Does anyone make something for me to fit in this OEM 2.5&quot; midrange spot in the front dash and rear doors?And what about which size midbass to use?In the videos I posted above it points out the mounting applications. This BSW company is using 5.25&quot; sets with an adapter plate to fit stock pod that has a 6&quot; opening not 6.5&quot; Should I be ditching the OEM pod and go another route so I can fit 6.5&quot; midbass drives in the the front and rear doors?TIA man!-Alex</blockquote>

[QUOTE="Lexicon740iL, post: 8026605, member: 649368"] I will check out that unit. Someone else recommended it on another thread of mine. Thats what I'm talking about man! a good response addressing several of the questions asked. I was hoping you would reply. I've read several posts by you and notice you are a supporting vendor here. I will def. send my business your way for going out of your way to help me with input on equiptment and system intrgration for my project. You mentioned rear deck a couple of times... The BWM X5 is a SUV so no rear deck. The rear doors have a 2.5" midrange and 6" midbass driver. Are you saying leave the OEM midrange in place and just swap out the midbass driver with an offering from PHD or DLS? and run them both off of OEM DSP amp power? Then for the fronts. The midrange in the dash is 2.5" and then a 20mm tweeter and 6" midbass drive in the door. Which set's would your recommend? Front stage and rear doors? Does anyone make something for me to fit in this OEM 2.5" midrange spot in the front dash and rear doors? And what about which size midbass to use? In the videos I posted above it points out the mounting applications. This BSW company is using 5.25" sets with an adapter plate to fit stock pod that has a 6" opening not 6.5" Should I be ditching the OEM pod and go another route so I can fit 6.5" midbass drives in the the front and rear doors? TIA man! -Alex [/QUOTE]

Verification