Reply to thread

Message

<blockquote data-quote="Liveyman" data-source="post: 616916" data-attributes="member: 557994">Thanks for the responses guys . I am just building this system for fun . The subs I am looking at are MTX 8000 10&#039;s . I can get 8 of them for under $400 . I can get 4 of the 15&#039;s for just a little more , but I am currently running 2 MTX 9500 15&#039;s and was just wanting to do something a little different . Back in the day a buddy of mine ran 8 JL 10W1&#039;s in a sealed box running off of an MTX 2300 . It was silly loud in his Blazer . I will be running a better sub in a much larger vented enclosure . Plus I will be giving them 2400 watts total power . For the money , I doubt I could put together a different system with anywhere near the same output . Most of these new subs that are decent all cost $150 plus . I can get these for under $50 a piece .Sorry to cause the heated debate . I have one other question though . When I pumped the numbers for the 8000&#039;s into Win ISD it was acting weird . I was trying to design a box between 10 and 12 cubes tuned to 29 Hz . Width 40 in , height 20 in , and 50 in long is the max size the enclosure can be . I want the subs firing up with one big port at the back of the car . When I tried to figure it , I started getting weird numbers . Some numbers were in the negative . Not sure what I am doing wrong . If someone can help it would be appreciated .</blockquote>

[QUOTE="Liveyman, post: 616916, member: 557994"] Thanks for the responses guys . I am just building this system for fun . The subs I am looking at are MTX 8000 10's . I can get 8 of them for under $400 . I can get 4 of the 15's for just a little more , but I am currently running 2 MTX 9500 15's and was just wanting to do something a little different . Back in the day a buddy of mine ran 8 JL 10W1's in a sealed box running off of an MTX 2300 . It was silly loud in his Blazer . I will be running a better sub in a much larger vented enclosure . Plus I will be giving them 2400 watts total power . For the money , I doubt I could put together a different system with anywhere near the same output . Most of these new subs that are decent all cost $150 plus . I can get these for under $50 a piece . Sorry to cause the heated debate . I have one other question though . When I pumped the numbers for the 8000's into Win ISD it was acting weird . I was trying to design a box between 10 and 12 cubes tuned to 29 Hz . Width 40 in , height 20 in , and 50 in long is the max size the enclosure can be . I want the subs firing up with one big port at the back of the car . When I tried to figure it , I started getting weird numbers . Some numbers were in the negative . Not sure what I am doing wrong . If someone can help it would be appreciated . [/QUOTE]

Verification