Reply to thread

Message

<blockquote data-quote="Lspade" data-source="post: 2744476" data-attributes="member: 563708">Alright, I concluded that this has to be the cause for the whine that I am hearing out of my speaker. I ruled out these probabilities:(Keep in mind, the noise only comes from my right speaker and it gets quieter and louder when my rpm&#039;s go down and up, the volume of the head unit has no effect on the noise, as long as the HU is on the noise is present)-Reversing the rca input does not move the sound from left to right.-Reversing the channels does not move the sound from left to right.-Putting in a 2.5 foot long ground strait to the body has no effect.-Running a new set of wires from the amp to cross over (these wires are not close to any other wire) has no effect.-Running a new ground for the HU has no effect.-Moving the crossover away from all electrical stuff has no effect.That means the sound is being produced after the cross over. I attached two pictures. I don&#039;t know what is in the picture but the camera was taken from the floor pointing up underneath the dash. The wires run up along this THING and I am guessing it is the reason for this annoying whine that I am getting. If not, I am soooo fricken lost.<img src="http:////forum/attachment.php?attachmentid=8243&amp;amp;d=1173747171" alt="" class="fr-fic fr-dii fr-draggable " style="" /><img src="http:////forum/attachment.php?attachmentid=8244&amp;amp;d=1173747211" alt="" class="fr-fic fr-dii fr-draggable " style="" /></blockquote>

[QUOTE="Lspade, post: 2744476, member: 563708"] Alright, I concluded that this has to be the cause for the whine that I am hearing out of my speaker. I ruled out these probabilities: (Keep in mind, the noise only comes from my right speaker and it gets quieter and louder when my rpm's go down and up, the volume of the head unit has no effect on the noise, as long as the HU is on the noise is present) -Reversing the rca input does not move the sound from left to right. -Reversing the channels does not move the sound from left to right. -Putting in a 2.5 foot long ground strait to the body has no effect. -Running a new set of wires from the amp to cross over (these wires are not close to any other wire) has no effect. -Running a new ground for the HU has no effect. -Moving the crossover away from all electrical stuff has no effect. [SIZE=18px]That means the sound is being produced after the cross over. I attached two pictures. I don't know what is in the picture but the camera was taken from the floor pointing up underneath the dash. The wires run up along this THING and I am guessing it is the reason for this annoying whine that I am getting. If not, I am soooo fricken lost.[/SIZE] [IMG]http:////forum/attachment.php?attachmentid=8243&d=1173747171[/IMG] [IMG]http:////forum/attachment.php?attachmentid=8244&d=1173747211[/IMG] [/QUOTE]

Verification