Reply to thread

Message

<blockquote data-quote="atlbraves" data-source="post: 5631709" data-attributes="member: 606510">Ok after talking to mobeious by the way hes a great builder done builds for me before and knows what hes doing. Well after talking to him since its a blowthrough and must have a loading chamber/compression chamber w/e its called i cant do the 4 18&#039;s. I was looking into 8 12&#039;s, 6 15&#039;s or 4 18&#039;s all ported. Well i have 62x49x20 external. minus around 10&quot; length for room for batts and ampsso looking at 52x49x20 external dimensions so after disp for wood looking at 25.6 cubes. the 18&#039;s will need around 24 cubes plus port and loading chamber so cant do that. the 8 12&#039;s are too long 48&quot; plus room for between subs to mount so thats out.&nbsp; the 6 15&#039;s is the same problem. So i have decided to go with either 2 18&#039;s or 4 15&#039;sI am leaning towards the 15&#039;s for cone area and more power. I am looking to run anywhere from 4-6k just depends what a 250-300amp alt and 4 batteries in the back and one upfront can handle.So what would u do the 2 18&#039;s on 3-4k watts or 4 15&#039;s on 4-5k watts 6k if i can keep voltage up.Also what subs. I was looking into RE XXX&#039;s, RLP&#039;s, BTL&#039;s. Post what subs and which setup you would look intoAlso what kind of addational weight am i looking at the batterys alone 80lbs a piece so 320lbs in the back, plus the box, how much would the box weigh. Dont want to add a bunch of weight and loss gas mileage or put stress on the ******</blockquote>

[QUOTE="atlbraves, post: 5631709, member: 606510"] Ok after talking to mobeious by the way hes a great builder done builds for me before and knows what hes doing. Well after talking to him since its a blowthrough and must have a loading chamber/compression chamber w/e its called i cant do the 4 18's. I was looking into 8 12's, 6 15's or 4 18's all ported. Well i have 62x49x20 external. minus around 10" length for room for batts and amps so looking at 52x49x20 external dimensions so after disp for wood looking at 25.6 cubes. the 18's will need around 24 cubes plus port and loading chamber so cant do that. the 8 12's are too long 48" plus room for between subs to mount so thats out. the 6 15's is the same problem. So i have decided to go with either 2 18's or 4 15's I am leaning towards the 15's for cone area and more power. I am looking to run anywhere from 4-6k just depends what a 250-300amp alt and 4 batteries in the back and one upfront can handle. So what would u do the 2 18's on 3-4k watts or 4 15's on 4-5k watts 6k if i can keep voltage up. Also what subs. I was looking into RE XXX's, RLP's, BTL's. Post what subs and which setup you would look into Also what kind of addational weight am i looking at the batterys alone 80lbs a piece so 320lbs in the back, plus the box, how much would the box weigh. Dont want to add a bunch of weight and loss gas mileage or put stress on the ****** [/QUOTE]

Verification