Reply to thread

Message

<blockquote data-quote="maldecido33" data-source="post: 1195749" data-attributes="member: 556412">I&#039;m running an orion 1200D and a Legacy Audio LA630 4 channel amp(around 1200 and 600watts, respectively).For the sake of organization and easiness, I was gonna run a high gauge wire into a distrabution block into two smaller wire sizes. The Orion is gonna push two 12&quot; Type R&#039;s, (500w RMS each), and the LA630 two 6.5&quot;s and two 4x6&quot;s, one on each channel.For this setup, I was thinking running 0/1 guage power wire from the battery, through an 80amp fuse, into a distribution block with a 4 guage output wire for the 1200D and an 8 guage output wire for the LA630. Was going to use the same setup for the ground wire as well, so I can have one ground rather than two.Also, I was going to use 12 guage wire to each sub, and 16 to each midrand spker.These wire sizes sound correct?Thanks!</blockquote>

[QUOTE="maldecido33, post: 1195749, member: 556412"] I'm running an orion 1200D and a Legacy Audio LA630 4 channel amp(around 1200 and 600watts, respectively). For the sake of organization and easiness, I was gonna run a high gauge wire into a distrabution block into two smaller wire sizes. The Orion is gonna push two 12" Type R's, (500w RMS each), and the LA630 two 6.5"s and two 4x6"s, one on each channel. For this setup, I was thinking running 0/1 guage power wire from the battery, through an 80amp fuse, into a distribution block with a 4 guage output wire for the 1200D and an 8 guage output wire for the LA630. Was going to use the same setup for the ground wire as well, so I can have one ground rather than two. Also, I was going to use 12 guage wire to each sub, and 16 to each midrand spker. These wire sizes sound correct? Thanks! [/QUOTE]

Verification