Reply to thread

Message

<blockquote data-quote="jrpro130" data-source="post: 1577834" data-attributes="member: 563425">Okay, I have a hifonics bx1605D hooked up at nominal 1 ohms (I have dual 4 ohm subs wired to 2 ohms each, wired to 1 ohm nominal) and it&#039;s not doing the job.&nbsp; I don&#039;t get a lot of excursion at all and I really need MORE POWER!!! //content.invisioncic.com/y282845/emoticons/yumyum.gif.0556df42231b304b9c995aefd13928a8.gifWith box rise, I&#039;m reading 5 ohms on the DMM, which I am guessing is wrong, but you never know.&nbsp;&nbsp; My DMM hasn&#039;t been treated nicely.&nbsp; So, I&#039;m guessing about 1.7-2oms after riseI was thinking about a PA A3000DB, but it doesn&#039;t seem like it would be enough, I mean, if it came down to it, could I strap them, and how easy would it be? If each does 1800 @ 2 oms, that means I will have 3600 @ 2 ohms.&nbsp; This is a competition setup and I will be very easy on the gains for DD.I just don&#039;t get why I&#039;m not getting that much excursion off the amp, I thought &quot;1600&quot; watts would be a lot better than it is...here&#039;s the vid if anyones interested to see the excursion... <a href="http://videos.streetfire.net/video/406AE527-B8CE-463A-B200-D9D043F8E978.htm" target="_blank">Click Here</a>So am I crazy wanting to strap 2 A3000DB&#039;s??? I mean, that should get me some excursion...and If your asking about electricals, I have a 200 amp alt in the process, 2 batteries, and a crap load of 2/0 wiring.&nbsp; I already have the big 3 in 2/0 also.Would on A3000DB be enough, I get 14.16 volts at idle and I figure I need at least 2kw, but this box rise is worrying me.&nbsp; Could it really read that high off NOMINAL 1 ohm??? Or is there something I did wrong? I just used the bananna clips...LMK</blockquote>

[QUOTE="jrpro130, post: 1577834, member: 563425"] Okay, I have a hifonics bx1605D hooked up at nominal 1 ohms (I have dual 4 ohm subs wired to 2 ohms each, wired to 1 ohm nominal) and it's not doing the job. I don't get a lot of excursion at all and I really need MORE POWER!!! [IMG]//content.invisioncic.com/y282845/emoticons/yumyum.gif.0556df42231b304b9c995aefd13928a8.gif[/IMG] With box rise, I'm reading 5 ohms on the DMM, which I am guessing is wrong, but you never know. My DMM hasn't been treated nicely. So, I'm guessing about 1.7-2oms after rise I was thinking about a PA A3000DB, but it doesn't seem like it would be enough, I mean, if it came down to it, could I strap them, and how easy would it be? If each does 1800 @ 2 oms, that means I will have 3600 @ 2 ohms. This is a competition setup and I will be very easy on the gains for DD. I just don't get why I'm not getting that much excursion off the amp, I thought "1600" watts would be a lot better than it is...here's the vid if anyones interested to see the excursion... [URL="http://videos.streetfire.net/video/406AE527-B8CE-463A-B200-D9D043F8E978.htm"]Click Here[/URL] So am I crazy wanting to strap 2 A3000DB's??? I mean, that should get me some excursion...and If your asking about electricals, I have a 200 amp alt in the process, 2 batteries, and a crap load of 2/0 wiring. I already have the big 3 in 2/0 also. Would on A3000DB be enough, I get 14.16 volts at idle and I figure I need at least 2kw, but this box rise is worrying me. Could it really read that high off NOMINAL 1 ohm??? Or is there something I did wrong? I just used the bananna clips...LMK [/QUOTE]

Verification