Reply to thread

Message: <blockquote data-quote="mbrooky" data-source="post: 6761738" data-attributes="member: 607333">I think what you are looking for is called a rabbit bit............cut out the circle starting from your inner circle diameter and work out to your outer circle in increments...then cutout your mounting hole lastjust plunge it down to the depth you want it mounted/flushed at.....if it's a 1/4" bit it will carve out in 1/2" at a time...so do the math for each pass and mark accordingly on your jasper jig...make sense??..lolso if your first cutout is 11 1/8 then the next is 11 5/8 then 12 1/8 and so on till your last pass...</blockquote>

Top