Reply to thread

Message

<blockquote data-quote="lionel2" data-source="post: 1908268" data-attributes="member: 566416"><p>I have a 9102d running my 3 subs..but wired to a 4 ohm load..i can go to 50/50 on volume with no problem...never gets hot or nothing...it slams just like your 10&#039;s i am sure...i was able to do low 140&#039;s with it at full volume...best advice this amp runs good wired to 4 ohm load..less stress on amp...not quite the nice power but it gets the job done...as for fuses its a 60A fuse rating..so i have 1 60A fuse at distro and a 100A fuse at battery..my 4 channel is a 40A..40+60=100A..it all works great...yes bestbuy hads RF...i would recommend the 550.2 or the bigger one the i wanna say 850.2 or something...goes for 399 and 599...550.2 does nice clean power..but the problem is they are a/b class amps...subs amps are usally D class..but hey some of the best sub amps are a/b class like US Amps..check out bestbuys website and look at specs...yeah alot of people been having problems with the kenwoods wired to 2 ohm load at high volumes...just make sure you have at least 4 guage and fused correctly...thanks..i like this thread..hope this helps</p></blockquote><p></p>

[QUOTE="lionel2, post: 1908268, member: 566416"] I have a 9102d running my 3 subs..but wired to a 4 ohm load..i can go to 50/50 on volume with no problem...never gets hot or nothing...it slams just like your 10's i am sure...i was able to do low 140's with it at full volume...best advice this amp runs good wired to 4 ohm load..less stress on amp...not quite the nice power but it gets the job done...as for fuses its a 60A fuse rating..so i have 1 60A fuse at distro and a 100A fuse at battery..my 4 channel is a 40A..40+60=100A..it all works great...yes bestbuy hads RF...i would recommend the 550.2 or the bigger one the i wanna say 850.2 or something...goes for 399 and 599...550.2 does nice clean power..but the problem is they are a/b class amps...subs amps are usally D class..but hey some of the best sub amps are a/b class like US Amps..check out bestbuys website and look at specs...yeah alot of people been having problems with the kenwoods wired to 2 ohm load at high volumes...just make sure you have at least 4 guage and fused correctly...thanks..i like this thread..hope this helps [/QUOTE]

Verification