Reply to thread

Message

<blockquote data-quote="fatryan" data-source="post: 1406281" data-attributes="member: 550026"><p>i installed a system in my boys tiburon. im having problems with the sub, but thats a different story. anyways, when i was running the power wire, i tried drilling through the firewall in like 4 different spots. i couldnt get through. i tried different bits and put all my weight into it and i barely made a knick in the metal. so i decided to run underneath the car. i bought some flex conduit and ran it along the frame. then from there i went up into the rear wheel well and into the hatch. well the conduit was getting close to the tire, but i managed to get it to a point where it was a decent distance away, then i secured it at the frame and hatch so it wouldnt move. well the next day it was rubbing against the tire. it doesnt appear the the conduit moved out of position, it seems it just started to hang a little from gravity or something. my question is, how can i fasten the conduit in the wheel well to keep it from touching the tire? i have it zip tied under the car, but theres nuthing to zip tie to in the wheel well. im also trying to not make the conduit visible. i originally set it in the rear of the well so that when the wheel is on the ground, the majority of the conduit is hidden by the tire. any ideas?</p></blockquote><p></p>

[QUOTE="fatryan, post: 1406281, member: 550026"] i installed a system in my boys tiburon. im having problems with the sub, but thats a different story. anyways, when i was running the power wire, i tried drilling through the firewall in like 4 different spots. i couldnt get through. i tried different bits and put all my weight into it and i barely made a knick in the metal. so i decided to run underneath the car. i bought some flex conduit and ran it along the frame. then from there i went up into the rear wheel well and into the hatch. well the conduit was getting close to the tire, but i managed to get it to a point where it was a decent distance away, then i secured it at the frame and hatch so it wouldnt move. well the next day it was rubbing against the tire. it doesnt appear the the conduit moved out of position, it seems it just started to hang a little from gravity or something. my question is, how can i fasten the conduit in the wheel well to keep it from touching the tire? i have it zip tied under the car, but theres nuthing to zip tie to in the wheel well. im also trying to not make the conduit visible. i originally set it in the rear of the well so that when the wheel is on the ground, the majority of the conduit is hidden by the tire. any ideas? [/QUOTE]

Verification