Reply to thread

Message

<blockquote data-quote="cecil1901" data-source="post: 2979476" data-attributes="member: 576254">I got my epicenter in not to long ago and no matter what I do I get a puk puk sound when the bass hits. This is my settings on my amp,crossover,HU and epi.The sweep is set all the way to the left and the wide is set all the way to the left. The Internal settings are set to 10 volts (option for 2.5, 5, and 7.5) the pfm subsonic filter is set to 33 Hz (I need this to be set lower). on the amp the input sensitivity is set to 0.3(max) the db gain is set to zero and the fq is set to 25hz the subsonic filter on the amp is off and the phase is set to 180* on the external cross over the db level is set to zero the low pass fq is set to 40hz (lowest) the fq Hz is set at 25(lowest) the main gain is set to half on the crossover also. on the head unit the loud button is off the bass is set to -7. The sub is rated to 1000rms watts and the amp is only pushing 850rms.Can anyone help?</blockquote>

[QUOTE="cecil1901, post: 2979476, member: 576254"] I got my epicenter in not to long ago and no matter what I do I get a puk puk sound when the bass hits. This is my settings on my amp,crossover,HU and epi. The sweep is set all the way to the left and the wide is set all the way to the left. The Internal settings are set to 10 volts (option for 2.5, 5, and 7.5) the pfm subsonic filter is set to 33 Hz (I need this to be set lower). on the amp the input sensitivity is set to 0.3(max) the db gain is set to zero and the fq is set to 25hz the subsonic filter on the amp is off and the phase is set to 180* on the external cross over the db level is set to zero the low pass fq is set to 40hz (lowest) the fq Hz is set at 25(lowest) the main gain is set to half on the crossover also. on the head unit the loud button is off the bass is set to -7. The sub is rated to 1000rms watts and the amp is only pushing 850rms. Can anyone help? [/QUOTE]

Verification