Reply to thread

Message

<blockquote data-quote="Got_Bass89" data-source="post: 6037353" data-attributes="member: 587107">Alright my buddy came over and said his amp wasn&#039;t working... I check the voltage on it with engine off and its fine... Turn truck on and amp comes on but 6volts from both power and remote!!! So its putting out no power of course... So im like iunno never seen before, amp might be ****ed up.. I put my bxi2008 in there and its fine for a few mins.. Shut truck off and turn back on its doing the same thing... With the hifonics the protect flash then the power flash like start up and then no lights on at all but the blue leds on the front come on... 6V on each power and remote... I tried to jump the remote wire off the power and still does it!!!Turn truck on with remote unplugged and the amp reads fine 14.4v then hook up remote BLAM 6v and 6v...Unplugged rcas tried it no help... Checked fuse up front and put new one in.. No help.... Speaker wire at 2ohms like normal...Donno what else! So Help! lol Thanks</blockquote>

[QUOTE="Got_Bass89, post: 6037353, member: 587107"] Alright my buddy came over and said his amp wasn't working... I check the voltage on it with engine off and its fine... Turn truck on and amp comes on but 6volts from both power and remote!!! So its putting out no power of course... So im like iunno never seen before, amp might be ****ed up.. I put my bxi2008 in there and its fine for a few mins.. Shut truck off and turn back on its doing the same thing... With the hifonics the protect flash then the power flash like start up and then no lights on at all but the blue leds on the front come on... 6V on each power and remote... I tried to jump the remote wire off the power and still does it!!! Turn truck on with remote unplugged and the amp reads fine 14.4v then hook up remote BLAM 6v and 6v... Unplugged rcas tried it no help... Checked fuse up front and put new one in.. No help.... Speaker wire at 2ohms like normal... Donno what else! So Help! lol Thanks [/QUOTE]

Verification