Reply to thread

Message: <blockquote data-quote="BCotrell" data-source="post: 8692237" data-attributes="member: 666314">Which means your 2’channel will be 2 x 35 and your bridged four channel eill be 200 x 2 (and that’s if it’s the first gen 900.4. The new ones don’t put out rated. It’s first gen if is there’s a 40 and 30Fuse on the outside of the amp.As all these system recommendation posts lead to....enclosure and power are going to dictate realized midbass output so long as you pick the right driver. Look at a pwx6 mid and a ct2 tweeter. Both 4 ohm and you could send that bridged power at four ohms to the mids and get 65x2 out of that 2 channel. Focus on your door treatment and you may be able to just use the ppi one speaker per channel.you Indicated your goal was output that could keep up with your sa so running 8 ohm drivers takes you the other direction from output.</blockquote>

Top