Reply to thread

Message: <blockquote data-quote="Etac" data-source="post: 5689974" data-attributes="member: 570589">like say you got a 4 channel amp.. and you're bridging it with two sets of inputs on the amp (for each side)so now you got 4 inputs on the amp.. LR LR..but since you're bridging them you only need say  R on one side and L on the other..this leaves a free R and L on each side..i just wasnt sure if hooking up a signal to each unused input would benefit anything.. i didnt think the Y cable would really do anything maybe.. but say you hooked up the HU front Right output and the HU rear Right output to use both inputs.. not sure if this would increase voltage to the amp or not?</blockquote>

Top