Reply to thread

Message

<blockquote data-quote="strobe" data-source="post: 8756324" data-attributes="member: 676536">hey all, been awhile but I&#039;m back with a new vehicle and a new project. Last project was my first box build which turned out fantastic (shoutout [USER=674179]@fithwheel[/USER]&nbsp; &amp; [USER=615398]@THATpurpleKUSH[/USER]&nbsp; for the help on that build), that has since been passed on to a friend since it won&#039;t fit in my new truck. Working with limited space and an AudioControl lc-1.800 for power (800@2ohm 500@4ohm). For reference, my absolute favorite sub at this time is an SVS SB1000 - so I&#039;m trying to replicate that in a mobile enclosure as much as possible.So far these are the possibilities I&#039;ve come up with:<ul>
<li data-xf-list-type="ul">two SD4-10s wired to 2 ohm load for 400RMS each in .5-.7 sealed enclosure (or a single on 500w 4ohm load may be enough)</li>
<li data-xf-list-type="ul">single dayton HO 10 in .55 sealed wedge (they sound power hungry, maybe run on 2 ohms and keep levels down a little to have access to full 800?)</li>
<li data-xf-list-type="ul">single dayton HO 10 with matching passive radiator tossed in enclosure volume TBD there - don&#039;t have ability to model in winISD at the moment</li>
</ul>Any other suggestions, please let me know. I&#039;ve looked at some of the true shallow mounts like the newish pioneer z-series 10, but I can&#039;t find any solid reviews or feedback on those. I love that low end grunt and SPL I achieved with my last build, but at the end of the day this little SVS sub has given me a new appreciation for SQ &amp; how clean bass can sound no matter the volume in a sealed enclosure while still digging deep. Attached the graph of that sub for reference.Thanks in advance for any input!</blockquote>

[QUOTE="strobe, post: 8756324, member: 676536"] hey all, been awhile but I'm back with a new vehicle and a new project. Last project was my first box build which turned out fantastic (shoutout [USER=674179]@fithwheel[/USER] & [USER=615398]@THATpurpleKUSH[/USER] for the help on that build), that has since been passed on to a friend since it won't fit in my new truck. Working with limited space and an AudioControl lc-1.800 for power (800@2ohm 500@4ohm). For reference, my absolute favorite sub at this time is an SVS SB1000 - so I'm trying to replicate that in a mobile enclosure as much as possible. So far these are the possibilities I've come up with: [LIST] [*]two SD4-10s wired to 2 ohm load for 400RMS each in .5-.7 sealed enclosure (or a single on 500w 4ohm load may be enough) [*]single dayton HO 10 in .55 sealed wedge (they sound power hungry, maybe run on 2 ohms and keep levels down a little to have access to full 800?) [*]single dayton HO 10 with matching passive radiator tossed in enclosure volume TBD there - don't have ability to model in winISD at the moment [/LIST] Any other suggestions, please let me know. I've looked at some of the true shallow mounts like the newish pioneer z-series 10, but I can't find any solid reviews or feedback on those. I love that low end grunt and SPL I achieved with my last build, but at the end of the day this little SVS sub has given me a new appreciation for SQ & how clean bass can sound no matter the volume in a sealed enclosure while still digging deep. Attached the graph of that sub for reference. Thanks in advance for any input! [/QUOTE]

Verification