Reply to thread

Message: <blockquote data-quote="bass_lover1" data-source="post: 1424627" data-attributes="member: 555256">I've heard nothing but great things about those drivers...if I didn't already have 6.5 mids, this go 'round, the Daytons would be my choice for my front active setup.You could probably get away w/o doing the clay (I did) but deadening is probably a good idea.You aren't taking the motor off the speaker, you're taking off the shielding magnet (so it can no longer be used near TVs) but in a car, that doesn't matter...plus you lose a lot of mounting depth that way.To do a 3-way setup, you'll either need a good 3-4 way external cross over...or a good amp w/ built in x-overs.  FYI, now you're going to need 6 channels of amplification to do this...I suggest a good 4 channel for the mids, then a smaller 2 channel for the tweeters.</blockquote>

Top