Reply to thread

Message

<blockquote data-quote="BallinOrBallOut" data-source="post: 4443655" data-attributes="member: 591308">I&#039;m thinking of getting a new amp for my subs.&nbsp; I have an okay set, could easily do better, but they pound HARD and look good.&nbsp; Anyways they&#039;re Dual 12&quot; 1100 watt subs that put out 600 watts RMS at 4 ohms.I have a Dual amp, which is awesome for what it is, that&#039;s putting out 580 watts at 4 ohms, or since I have it bridged it&#039;s doing 290 watts RMS at 4 ohms.Time to upgrade...the amp at least.&nbsp; I&#039;m thinking about getting an Ultra Linear UL1202.&nbsp; Anyone ever heard of it?&nbsp; 1X1200 watts RMS @ 4 ohms, 2X600 watts RMS @ 2 ohms, or 2x300 watts RMS @ 4 ohms. Good choice?&nbsp; ANY thoughts?&nbsp; Will the subs hold the amp?&nbsp; I believe they&#039;re wired series...I&#039;m not sure because they came already put together in a band pass box that looks like a b#$@h to open.&nbsp; But by them being 600 watts would that mean 600 each, or 300 each?&nbsp; Basically should i bridge the amp or rewire the subs in the box so that i can run 2 channels?&nbsp; Should I go for a smaller amp?&nbsp; (only cost $80 brand new) Any help is appreciated.</blockquote>

[QUOTE="BallinOrBallOut, post: 4443655, member: 591308"] I'm thinking of getting a new amp for my subs. I have an okay set, could easily do better, but they pound HARD and look good. Anyways they're Dual 12" 1100 watt subs that put out 600 watts RMS at 4 ohms. I have a Dual amp, which is awesome for what it is, that's putting out 580 watts at 4 ohms, or since I have it bridged it's doing 290 watts RMS at 4 ohms. Time to upgrade...the amp at least. I'm thinking about getting an Ultra Linear UL1202. Anyone ever heard of it? 1X1200 watts RMS @ 4 ohms, 2X600 watts RMS @ 2 ohms, or 2x300 watts RMS @ 4 ohms. Good choice? ANY thoughts? Will the subs hold the amp? I believe they're wired series...I'm not sure because they came already put together in a band pass box that looks like a b#$@h to open. But by them being 600 watts would that mean 600 each, or 300 each? Basically should i bridge the amp or rewire the subs in the box so that i can run 2 channels? Should I go for a smaller amp? (only cost $80 brand new) Any help is appreciated. [/QUOTE]

Verification