Reply to thread

Message

<blockquote data-quote="Vipervenom18" data-source="post: 2977623" data-attributes="member: 575434">Hello again fellas,I am buying a 1999 Camaro Coupe.&nbsp; This is not another &quot;can I put a system in my car&quot; thread, I know what I can do... It is mainly to get a hold on the best option out of two I can do with the system.1) I can get the enclosure for two twelves seen here: <a href="http://www.subthump.com/acamarottop.htm" target="_blank">http://www.subthump.com/acamarottop.htm</a>2) or I can fit a single 10, most likely the TC OEM 10 in this one (and install the amp rack as well): <a href="http://www.subthump.com/acamarostealth.htm" target="_blank">http://www.subthump.com/acamarostealth.htm</a>Here is where I am at, and where I am torn:I already have the dual 12&#039;s (TC-1000s) and amp to power them (Mmats D1500.2).&nbsp; This was in my previous truck, and it was loud for me.So If I went with option one, I could just get the box... amp and subs I already have.&nbsp; However, I am keeping he Camaro stock and the added weight and 100 percent loss of storage area makes me not want to do it, especially when mounting the amps on the only other storage location: the top rear deck.If I went with the single 10, I would save weight, as well as keep storage area, all the while having room for the amp rack.&nbsp; (Even though side firing sucks).&nbsp; I&#039;d go with this one usually (and I can use my existing amp as well) but I just do not know if I will be satisfied with a single 10 after being with a pair of ported 12&#039;s for so long.&nbsp; I am 100 percent torn on what to do, and am looking at some outside opinions on what to do.One other main concern is the rear hatch with the pair of 12&#039;s... I know there are a lot of you on the forum with that style of set up with Maro&#039;s on here, and if you could tell me if the hatch rattles like crazy considering the firing direction etc of the subs that would be great.Sorry for the long post. If you want me to put a summarized version of this in bullet form I will.Thanks again!</blockquote>

[QUOTE="Vipervenom18, post: 2977623, member: 575434"] Hello again fellas, I am buying a 1999 Camaro Coupe. This is not another "can I put a system in my car" thread, I know what I can do... It is mainly to get a hold on the best option out of two I can do with the system. 1) I can get the enclosure for two twelves seen here: [URL="http://www.subthump.com/acamarottop.htm"]http://www.subthump.com/acamarottop.htm[/URL] 2) or I can fit a single 10, most likely the TC OEM 10 in this one (and install the amp rack as well): [URL="http://www.subthump.com/acamarostealth.htm"]http://www.subthump.com/acamarostealth.htm[/URL] Here is where I am at, and where I am torn: I already have the dual 12's (TC-1000s) and amp to power them (Mmats D1500.2). This was in my previous truck, and it was loud for me. So If I went with option one, I could just get the box... amp and subs I already have. However, I am keeping he Camaro stock and the added weight and 100 percent loss of storage area makes me not want to do it, especially when mounting the amps on the only other storage location: the top rear deck. If I went with the single 10, I would save weight, as well as keep storage area, all the while having room for the amp rack. (Even though side firing sucks). I'd go with this one usually (and I can use my existing amp as well) but I just do not know if I will be satisfied with a single 10 after being with a pair of ported 12's for so long. I am 100 percent torn on what to do, and am looking at some outside opinions on what to do. One other main concern is the rear hatch with the pair of 12's... I know there are a lot of you on the forum with that style of set up with Maro's on here, and if you could tell me if the hatch rattles like crazy considering the firing direction etc of the subs that would be great. Sorry for the long post. If you want me to put a summarized version of this in bullet form I will. Thanks again! [/QUOTE]

Verification