Reply to thread

Message: <blockquote data-quote="REAudio2001" data-source="post: 6104539" data-attributes="member: 611407">Hey,I am going to be tunning my 2 amps tomorrow.  They are HIfonics Brutus BXI 2610D amps.  They are 2600 X 1. I do not own or have access to an o-scope, so I will be using my DMM.  My question is that since they will be strapped, how do i tune?.  They operate at 2 ohms minimum when strapped.  I will have the load down to 2 ohms.  I am trying to set the amps for 2500 a piece, 5000 total.  My question is im assuming i get voltage from both positives on the two amps, as that is where the load is, but when I attempted I could not get over 30 volts.  I am using the right voltage on my DMM FYI.  I need 100 volts as it is 5000 watts into 2 ohms.  Thanks in advance</blockquote>

Top