Reply to thread

Message

<blockquote data-quote="scadiz" data-source="post: 8469062" data-attributes="member: 666275">CDT CL 62 set on Rockford p400.4AndSoundqubed HDS300 15&#039;&#039; on crescender bc2000 in 4 cubes ported at 32hzJust recently put everything together hand have the gains set pretty mildly, but have no idea how to tune the crossoversThe problem I&#039;m having is slightcrackling distortion from the cdts, both from the mids and tweeters at high ish volume, but I notice it only distorts when the song &quot;plays simple notes&quot; if that makes sense. If there&#039;s a lot of different sounds , they don&#039;t audibly distort. Also, I have the stock speakers in the rear and they still play louder than the front, I have to fade to the rear through the deck by 3 or 4 to get a good balance between them.My question is, I&#039;m sure I&#039;m not pushing them as much as they can handle... Why aren&#039;t they getting loud?&nbsp; Could the crossovers help me tune out the distortion? Have them all set pretty much in the middle right now.ThanksSent from my LGLS991 using Tapatalk</blockquote>

[QUOTE="scadiz, post: 8469062, member: 666275"] CDT CL 62 set on Rockford p400.4 And Soundqubed HDS300 15'' on crescender bc2000 in 4 cubes ported at 32hz Just recently put everything together hand have the gains set pretty mildly, but have no idea how to tune the crossovers The problem I'm having is slightcrackling distortion from the cdts, both from the mids and tweeters at high ish volume, but I notice it only distorts when the song "plays simple notes" if that makes sense. If there's a lot of different sounds , they don't audibly distort. Also, I have the stock speakers in the rear and they still play louder than the front, I have to fade to the rear through the deck by 3 or 4 to get a good balance between them. My question is, I'm sure I'm not pushing them as much as they can handle... Why aren't they getting loud? Could the crossovers help me tune out the distortion? Have them all set pretty much in the middle right now. Thanks Sent from my LGLS991 using Tapatalk [/QUOTE]

Verification