Reply to thread

Message: <blockquote data-quote="Lurius" data-source="post: 2034071" data-attributes="member: 564618">I got it down now, osme of the cuts are a little rough, but im going to clamp the rings together and use a belt sander to make them match on the outside.. the insides dont need any work really. I got them all cut out, should be sanding them once its cooler outside(we have 102+ weather all week down here, and not much wind!).  I picked up another 4x8 panel of 3/4" as well to make the tops, back, and front of the box, might cut them out tonight as well. Onces its all assembled im going to go to a shp that sells the sub and see if they fit as a final check in clearance, though I dont think ill have any problems. Smooth sailing from here =)-Lurius</blockquote>

Top