Reply to thread

Message

<blockquote data-quote="Lurius" data-source="post: 2028910" data-attributes="member: 564618">I&#039;ll have to clean up the design a bit, but remember, that the 98 model and the very early 99 models(OBS 99 models) have a different setup than the NBS trucks. It will have to be adapted to fit properly as the heights and depths as well as the center hump will be different in our trucks. I&#039;ll clean it up and send it if you can give me an email address to send the file to, i&#039;ll send the sketchup file, much easier that way.I havent pulled the insulation yet, im still in need of another 30 sq foot or so to give me two layers on the floor(none installed there yet, then im going to coat it in edead v3 and now that you mention it, it might be a good idea to replace that grey insulation with some thinner foam stuff.As for the bracket: <img src="http://chevytruckworld.tenmagazines.com/gallery/Lurius/205361.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />-Lurius</blockquote>

[QUOTE="Lurius, post: 2028910, member: 564618"] I'll have to clean up the design a bit, but remember, that the 98 model and the very early 99 models(OBS 99 models) have a different setup than the NBS trucks. It will have to be adapted to fit properly as the heights and depths as well as the center hump will be different in our trucks. I'll clean it up and send it if you can give me an email address to send the file to, i'll send the sketchup file, much easier that way. I havent pulled the insulation yet, im still in need of another 30 sq foot or so to give me two layers on the floor(none installed there yet, then im going to coat it in edead v3 and now that you mention it, it might be a good idea to replace that grey insulation with some thinner foam stuff. As for the bracket: [IMG]http://chevytruckworld.tenmagazines.com/gallery/Lurius/205361.jpg[/IMG] -Lurius [/QUOTE]

Verification