Reply to thread

Message

<blockquote data-quote="Lurius" data-source="post: 2028340" data-attributes="member: 564618">Some of those guys who posted guides on the seat fold down mod cut way too much off. I took it slow and tested a few times to get it where I have mine trimmed to and it only has one problem(other than not being able to lift the seat higher up). Sometimes only one sides latch will catch and the other will be on the outside of that metal bar on the cab wall and will be a B*TCH to get back, but its rare.Thanks again, i&#039;m definantly going to check and recheck, and once I know the subs can fit the box ill build the box before ordering the subs. I want this to work already, I dont need any more problems haha. Im thinking of getting the box sprayed in bedliner. I liked that look on the Proboxes. Also they can do color matching, maybe get it to match my trucks paint.-LuriusPS: about the mounting depth, the only problem im having getting them to fit really is that I have to raise the floor of the box so high that it removes 1/3rd of the mounting depth! lol. I was told to allow 3&quot; from the mounting depth outward for the RE SX 10s so they wouldent bottom out, otherwise the box would have held them fine with 1 1/2&quot; high bottom.</blockquote>

[QUOTE="Lurius, post: 2028340, member: 564618"] Some of those guys who posted guides on the seat fold down mod cut way too much off. I took it slow and tested a few times to get it where I have mine trimmed to and it only has one problem(other than not being able to lift the seat higher up). Sometimes only one sides latch will catch and the other will be on the outside of that metal bar on the cab wall and will be a B*TCH to get back, but its rare. Thanks again, i'm definantly going to check and recheck, and once I know the subs can fit the box ill build the box before ordering the subs. I want this to work already, I dont need any more problems haha. Im thinking of getting the box sprayed in bedliner. I liked that look on the Proboxes. Also they can do color matching, maybe get it to match my trucks paint. -Lurius PS: about the mounting depth, the only problem im having getting them to fit really is that I have to raise the floor of the box so high that it removes 1/3rd of the mounting depth! lol. I was told to allow 3" from the mounting depth outward for the RE SX 10s so they wouldent bottom out, otherwise the box would have held them fine with 1 1/2" high bottom. [/QUOTE]

Verification