Reply to thread

Message

<blockquote data-quote="Lurius" data-source="post: 2027590" data-attributes="member: 564618">I do know what you mean. My Probox does that. I was wondering how that guy got the 7&quot; mounting depth all around on that box. Mine worked out at 7&quot; but got more narrow at one way(towards the back) but luckily most of the magnets I had been looking at taped off, and only the peak mounting depth was present at the center of the base.I&#039;ll check it out in sketchup and see if a raise in the center would help. Thanks! He dosent show the pics of the tops of the box on his site.-LuriusPS: Tried it out in shetchup - Im getting just under 6&quot; depth with the floor raised to 3&quot;, how the plans are now. But adding an extra 5/8th&quot; to the top(the top was mapped out to be 5/8&#039;s&quot; MDF to help with clearance) it comes out to 6 1/2&quot; Just barely ovr what I need for the SX 10&quot;, however, thats at the center, the sides of the magnet dont clear, i&#039;d have to do like 2 laters of the MDF on top to clear it, and then the seats might not fold back down right! Bah.</blockquote>

[QUOTE="Lurius, post: 2027590, member: 564618"] I do know what you mean. My Probox does that. I was wondering how that guy got the 7" mounting depth all around on that box. Mine worked out at 7" but got more narrow at one way(towards the back) but luckily most of the magnets I had been looking at taped off, and only the peak mounting depth was present at the center of the base. I'll check it out in sketchup and see if a raise in the center would help. Thanks! He dosent show the pics of the tops of the box on his site. -Lurius PS: Tried it out in shetchup - Im getting just under 6" depth with the floor raised to 3", how the plans are now. But adding an extra 5/8th" to the top(the top was mapped out to be 5/8's" MDF to help with clearance) it comes out to 6 1/2" Just barely ovr what I need for the SX 10", however, thats at the center, the sides of the magnet dont clear, i'd have to do like 2 laters of the MDF on top to clear it, and then the seats might not fold back down right! Bah. [/QUOTE]

Verification