Reply to thread

Message

<blockquote data-quote="miccheck" data-source="post: 7469183" data-attributes="member: 636246">I&#039;ve been reading and watching videos day in and day out just a month ago I didn&#039;t even know what ohms had to do with subs. But anyways here are a few pictures of what I have done, thinking I did right. But I have a feeling I&#039;m not quite going in the right direction or missing something. The first picture is of a sketchup that I did. Sorry if it ain&#039;t that pretty I just learned about this program today.[ATTACH]26527231[/ATTACH]This next one is of bass box, the dimensions for the 1st pic is found in design 2 which are&nbsp; measurements of the space I can use in my trunk.[ATTACH]26527232[/ATTACH]The box seems to big for the subs and the port length seams way to small for what I have been seeing. I picked 40hz because I listen to a lot of different music and thought maybe 40 will be a good balance ( I may be totally wrong).One thing that I don&#039;t understand is &quot;Vent Ends&quot; being One Flush or Two Flush. Well honestly I have no clue about those graphs but I&#039;m just trying to duplicate what others do to try and learn but after so much learning I feel a brain aneurysm coming.Both of these subs are being pushed by the new DX1000.1 by kicker and they go into a 98&#039; Regal.Thank you very much for your time and any help will be greatly appreciated.After some sleep I remember why I really put a post of Bassbox. Designs 1,2, and 3 are all of the box size I entered just changing the tunning freq. and port width, while design 4 is of me clicking the optimize key and letting the program do everything. To me the box size that it is telling me seems to small and the FB is 25hz which seems to low as well. With one and two by changing just the port width (and length respectively) I get like double the vent air velocity, should I even care about that though?</blockquote>

[QUOTE="miccheck, post: 7469183, member: 636246"] I've been reading and watching videos day in and day out just a month ago I didn't even know what ohms had to do with subs. But anyways here are a few pictures of what I have done, thinking I did right. But I have a feeling I'm not quite going in the right direction or missing something. The first picture is of a sketchup that I did. Sorry if it ain't that pretty I just learned about this program today. [ATTACH=CONFIG]26527231[/ATTACH] This next one is of bass box, the dimensions for the 1st pic is found in design 2 which are measurements of the space I can use in my trunk. [ATTACH=CONFIG]26527232[/ATTACH] The box seems to big for the subs and the port length seams way to small for what I have been seeing. I picked 40hz because I listen to a lot of different music and thought maybe 40 will be a good balance ( I may be totally wrong). One thing that I don't understand is "Vent Ends" being One Flush or Two Flush. Well honestly I have no clue about those graphs but I'm just trying to duplicate what others do to try and learn but after so much learning I feel a brain aneurysm coming. Both of these subs are being pushed by the new DX1000.1 by kicker and they go into a 98' Regal. Thank you very much for your time and any help will be greatly appreciated. After some sleep I remember why I really put a post of Bassbox. Designs 1,2, and 3 are all of the box size I entered just changing the tunning freq. and port width, while design 4 is of me clicking the optimize key and letting the program do everything. To me the box size that it is telling me seems to small and the FB is 25hz which seems to low as well. With one and two by changing just the port width (and length respectively) I get like double the vent air velocity, should I even care about that though? [/QUOTE]

Verification