Reply to thread

Message: <blockquote data-quote="edzy" data-source="post: 5591885" data-attributes="member: 573836">Well, if you ran your 2-3 ohm speakers off a mono amp, yes it would be a 1.5 ohm load.But the amps that are being recommended are 2 channel amps. So wire each 3 ohm speaker to each channel for a 3 ohm load on each channel of the amp for a final 3 ohm load on the amps terminal from the 3 ohm load of the speaker to the amps seperate terminal for a 3 ohm load on the amp. This will result in each of the amps two cgannels seeing a final 3 ohm load from each of the 3 ohm speaker.</blockquote>

Top