Reply to thread

Message: <blockquote data-quote="ThxOne" data-source="post: 8895763" data-attributes="member: 675210"><p>I figured out how to be able to use my factory radio and my HiRes audio player in the same system. I just ordered 25 feet of four conductor speaker wire. I am going to pull the speaker out connector on the factory amplifier and cut the front left and right speaker wires. I will use the 4 conductor wire to run the factory amplified signal to DSP in the rear and plug those into the high level inputs. I will run speaker wire back up front to the same cut amplified wires and connect to the wires that go into the doors. Now the factory amplifier will supply my OEM radio signal to the DSP and the JP77 will send power to the door speakers. I hope that makes sense. The FiiO will be connected to the DSP via coaxial cable.</p></blockquote><p></p>

Top