Reply to thread

Message

<blockquote data-quote="bigjus" data-source="post: 1794209" data-attributes="member: 559381">aloha. been about a year since i disassembled my car and ordered a ton of stereo stuff (yeah yeah yeah, got caught up with work, etc. for the past year - and i didn&#039;t miss the tunes with the voices running thru my head //content.invisioncic.com/y282845/emoticons/banghead.gif.8606515f668c74f6de0281deb475b6fd.gif&nbsp; ) anyways, this weekend looking to finally get an install done to replace the voices in my head with sonic goodness. the product below is what i purchased last year, and just received my new kenwood ddx6019. need some thoughts on hooking everything up as i can&#039;t remember what i was thinking last year when i ordered everything, LOL.HU - kenwood ddx6019amps - nine.4 and nine.4front stage - aura MR62&#039;s (65W RMS, 4ohm)rear fill - polk db6500&#039;s (may not use these, 60W RMS, 4ohm)midbass - jl 6w0 (75W RMS, SVC, 4ohm)sub - ed 11kv2 (300W RMS, dual 4)right now i&#039;m thinking the nine.4 powers the auras and the 6w0, the rear fill should i use it runs off the HU internal amp, and the nine.2 powers the 11kv2. however, where i&#039;m getting lost (well, thinking i screwed up last year and should have ordered the dual 2) is wiring the sub to the nine.2. the nine.2 does 1x400@4ohm, with a d4 don&#039;t think i can get a 4ohm load? thoughts on the entire setup? (thoughts besides ebay the stuff!) looking for some alternate views on everything.thanks.</blockquote>

[QUOTE="bigjus, post: 1794209, member: 559381"] aloha. been about a year since i disassembled my car and ordered a ton of stereo stuff (yeah yeah yeah, got caught up with work, etc. for the past year - and i didn't miss the tunes with the voices running thru my head [IMG]//content.invisioncic.com/y282845/emoticons/banghead.gif.8606515f668c74f6de0281deb475b6fd.gif[/IMG] ) anyways, this weekend looking to finally get an install done to replace the voices in my head with sonic goodness. the product below is what i purchased last year, and just received my new kenwood ddx6019. need some thoughts on hooking everything up as i can't remember what i was thinking last year when i ordered everything, LOL. HU - kenwood ddx6019 amps - nine.4 and nine.4 front stage - aura MR62's (65W RMS, 4ohm) rear fill - polk db6500's (may not use these, 60W RMS, 4ohm) midbass - jl 6w0 (75W RMS, SVC, 4ohm) sub - ed 11kv2 (300W RMS, dual 4) right now i'm thinking the nine.4 powers the auras and the 6w0, the rear fill should i use it runs off the HU internal amp, and the nine.2 powers the 11kv2. however, where i'm getting lost (well, thinking i screwed up last year and should have ordered the dual 2) is wiring the sub to the nine.2. the nine.2 does 1x400@4ohm, with a d4 don't think i can get a 4ohm load? thoughts on the entire setup? (thoughts besides ebay the stuff!) looking for some alternate views on everything. thanks. [/QUOTE]

Verification