Reply to thread

Message

<blockquote data-quote="Lspade" data-source="post: 2779798" data-attributes="member: 563708">Fixed The Pictures......Ok, the distortion noise just comes and goes now???? Last night I was pulling into my yard and as I downshifted the noise got LOUD //content.invisioncic.com/y282845/emoticons/furious.gif.fc81ca146dbff91fede3ed290dbc4f4c.gif! This morning when I got off work I could only hear a slight whine which is not heard after I turn the volume up past 5.I will sort through all of your suggestions and do the ones that I haven&#039;t tried but so far absolutely nothing has worked. I have tried the following:grounded amp to chasis,grounded hu to chasis,grounded hu directly to battery,grounded rca&#039;s on amplifier,ground loop isolator (worked but small popping noises were present),plus quite a few other things //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif.I currently have the headunit grounded on the ground wire for the amplifier. This means that there is about 4 feet of 0 gauge leading from the negative terminal on the battery to 4 feet of 10 gauge and 4 feet of 0 guage leading to the head unit and the amplifiers. (That probly sounds stupid but I was running out of options and HAD to try it, haha).</blockquote>

[QUOTE="Lspade, post: 2779798, member: 563708"] Fixed The Pictures... . . . Ok, the distortion noise just comes and goes now???? Last night I was pulling into my yard and as I downshifted the noise got LOUD [IMG]//content.invisioncic.com/y282845/emoticons/furious.gif.fc81ca146dbff91fede3ed290dbc4f4c.gif[/IMG]! This morning when I got off work I could only hear a slight whine which is not heard after I turn the volume up past 5. I will sort through all of your suggestions and do the ones that I haven't tried but so far absolutely nothing has worked. I have tried the following: grounded amp to chasis, grounded hu to chasis, grounded hu directly to battery, grounded rca's on amplifier, ground loop isolator (worked but small popping noises were present), plus quite a few other things [IMG]//content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif[/IMG]. I currently have the headunit grounded on the ground wire for the amplifier. This means that there is about 4 feet of 0 gauge leading from the negative terminal on the battery to 4 feet of 10 gauge and 4 feet of 0 guage leading to the head unit and the amplifiers. (That probly sounds stupid but I was running out of options and HAD to try it, haha). [/QUOTE]

Verification