Reply to thread

Message

<blockquote data-quote="Deejor" data-source="post: 8251178" data-attributes="member: 565427">Thanks for all the feedback guys.&nbsp; I&#039;m actually liking mylows10 suggestion the more I learn about the power ratings.&nbsp; I looked up the deck power rating and saw it was 50Wx4 but then did a bit more searching and found out that its actually more like 15Wx4.&nbsp; 75W would seem to be plenty for most 6.5&#039;s I&#039;m assuming.Like I mentioned earlier I am eventually wanting to get a sub or two in the van (just not the same without it) and while looking at different amps I saw some prebuilt <a href="http://www.sonicelectronix.com/item_2018_Single-10-Sealed-MDF-Subwoofer-Enclosure-Belva-MDFS10.html" target="_blank">sealed subwoofer boxes</a> to hold a single 10 that would easily fit right between the two front seats underneath my foldaway console.&nbsp; The box runs around $40 and the <a href="http://www.sonicelectronix.com/item_33743_Rockford-Fosgate-R2D4-10.html" target="_blank">woofers</a> seem to range from about $50-$80.&nbsp; With the <a href="http://www.sonicelectronix.com/item_38339_Precision-Power-PPI-P900.5.html" target="_blank">PPI 900.5</a> at $210, <a href="http://www.sonicelectronix.com/item_45061_NVX-XAPK4.html" target="_blank">nvx ofc 4ga wiring kit for $70</a>, box and woofer at $100 I&#039;m off and running for about $400 with minimal effort.&nbsp; The amp is rated for 440W RMS @2ohms on the sub channel, seems sufficient for even 2 10&#039;s.Anyone see any holes in the logic or problems with the equipment choices?&nbsp; I&#039;ll probably research the woofer more this weekend to see if I can figure out what would work best for that enclosure.</blockquote>

[QUOTE="Deejor, post: 8251178, member: 565427"] Thanks for all the feedback guys. I'm actually liking mylows10 suggestion the more I learn about the power ratings. I looked up the deck power rating and saw it was 50Wx4 but then did a bit more searching and found out that its actually more like 15Wx4. 75W would seem to be plenty for most 6.5's I'm assuming. Like I mentioned earlier I am eventually wanting to get a sub or two in the van (just not the same without it) and while looking at different amps I saw some prebuilt [URL="http://www.sonicelectronix.com/item_2018_Single-10-Sealed-MDF-Subwoofer-Enclosure-Belva-MDFS10.html"][B]sealed subwoofer boxes[/B][/URL] to hold a single 10 that would easily fit right between the two front seats underneath my foldaway console. The box runs around $40 and the [URL="http://www.sonicelectronix.com/item_33743_Rockford-Fosgate-R2D4-10.html"][B]woofers[/B][/URL] seem to range from about $50-$80. With the [URL="http://www.sonicelectronix.com/item_38339_Precision-Power-PPI-P900.5.html"][B]PPI 900.5[/B][/URL] at $210, [URL="http://www.sonicelectronix.com/item_45061_NVX-XAPK4.html"][B]nvx ofc 4ga wiring kit for $70[/B][/URL], box and woofer at $100 I'm off and running for about $400 with minimal effort. The amp is rated for 440W RMS @2ohms on the sub channel, seems sufficient for even 2 10's. Anyone see any holes in the logic or problems with the equipment choices? I'll probably research the woofer more this weekend to see if I can figure out what would work best for that enclosure. [/QUOTE]

Verification