Reply to thread

Message: <blockquote data-quote="94Mazda626" data-source="post: 4515597" data-attributes="member: 582332">Check the crossover slopes, if they are set for 0db then they won't do anything. I think I have mine set for 18/db.  set your HP at box tuning if ported or as low as possible with a low slope if sealed.  LP at whatever sounds good to you with a mid range slope (anywhere from 12 to 24 db,)Your deck is a 2V preout (after a 2 second google search), set gain range for 2 volt and gain to the high end (don't remember what numbers it uses), basically what that does is lets the amp know 1-2v, and the actual gain setting lets it know that it's at the high end of that range.</blockquote>

Top