Reply to thread

Message: <blockquote data-quote="tsupra98" data-source="post: 5011559" data-attributes="member: 597873"><p>first off make sure you take the neg off your batt before you do anything with it.  then swap amps check fuses and wire size and what not.  also if you don't have the big three done you might want to look into it.  i'm guess your eletrical system is completely stock?  so do the big three and check your voltage and make sure it doesn't drop below 12-12.5 volts.  if it does then you might want to look into putting a second batt in.  i'm running a zx750.1 and at idle with only the system going i drop down to 12 to 12.5 volts and all i have down is the big three with a 90 amp alt and stock batt.  but if the ac is on or anything then it drops below 12 volts.  so with that amp you might want a second batt in the back.</p></blockquote><p></p>

Top