Reply to thread

Message

<blockquote data-quote="theothermike" data-source="post: 3243500" data-attributes="member: 568137">2x sundown sae 1000D&#039;s, proto #1 and 2. both bought from jacob directly and both have paper work with warrenty. used one for a good 5-6 months. other one has been uninstaleld since it was purchased from jacob. both have the small edge rings by the mounting feet which u wont see with screws over them, and the one being used has a nick about 1.5 mm long on the edge of the top not on the flat part but the edge from the screw driver rubbing 1 time when tightening the terminalid like one of your 1500D&#039;s and a run of the wire?i also got some other stuff if u need any install assessories, i got 2x lnib stinger expert terminals with 2 1/0 openings and 4 gauge fittings, brand new knukonceptz inline fuse holder 1/0, with new 250 amp fuse, i have some 16 gauge left over. about 25 ft or so. some old trioval knukonceptz battery terminals, ground blocks, etc.....LMK if u wanna work a deal. pm me</blockquote>

[QUOTE="theothermike, post: 3243500, member: 568137"] 2x sundown sae 1000D's, proto #1 and 2. both bought from jacob directly and both have paper work with warrenty. used one for a good 5-6 months. other one has been uninstaleld since it was purchased from jacob. both have the small edge rings by the mounting feet which u wont see with screws over them, and the one being used has a nick about 1.5 mm long on the edge of the top not on the flat part but the edge from the screw driver rubbing 1 time when tightening the terminal id like one of your 1500D's and a run of the wire? i also got some other stuff if u need any install assessories, i got 2x lnib stinger expert terminals with 2 1/0 openings and 4 gauge fittings, brand new knukonceptz inline fuse holder 1/0, with new 250 amp fuse, i have some 16 gauge left over. about 25 ft or so. some old trioval knukonceptz battery terminals, ground blocks, etc..... LMK if u wanna work a deal. pm me [/QUOTE]

Verification