Reply to thread

Message

<blockquote data-quote="bigtymer2306" data-source="post: 7598672" data-attributes="member: 564549">The SAX-100.4 is the first full-range 4 channel*amplifier released from Sundown Audio. This unit was built to satisfy the high demand for an afforadble*high quality full range amplifier. The crossovers built into this amplifier allow the user to run a 2-way active speaker setup with no external processing.*Expect only the best from Sundown!*Specifications:100 x 4 @ 4 ohms160 x 4 @ 2 ohms320 x 2 @ 4 ohms bridgedDamping Factor &amp;gt; 200 @ 4 Ohms0.2v - 6v adjustable input sensitivity10 Hz - 40,000 Hz Frequency ResponseChannel Separations: 75 dB*&amp;gt; 90 dB S/N Ratio4-Way Protection Circuit (Thermal, Overload, Speaker Short, and Over Current)Selectable HP / LP / FULL crossoverCH 1 &amp;amp; 2 Variable HP crossover 50 - 5000 Hz @ 12 dBCH 1 &amp;amp; 2 Variable LP crossover 50 - 500 Hz @ 12 dBCH 3 &amp;amp; 4 Variable HP crossover 50 - 500 Hz @ 12 dBCH 3 &amp;amp; 4 Variable LP crossover 50 - 5000 Hz @ 12 dB10 Hz - 500 Hz variable subsonic filter (CH 1&amp;amp;2 and CH 3&amp;amp;4)Subsonic filter allows for band-passed crossover configuration0 - 18 dB adjustable bass boost35 - 120 Hz Variable Bass Boost Center FrequencyWired Remote Control unit included3x 30 Amp Internal Fuses252(W) x 58(H) x 480(L)mmIt has variable crossovers and channels 3-4 may be used for some type of sub.. It also has a gain knob you can mount up front if you use 3-4 like that</blockquote>

[QUOTE="bigtymer2306, post: 7598672, member: 564549"] The SAX-100.4 is the first full-range 4 channel*amplifier released from Sundown Audio. This unit was built to satisfy the high demand for an afforadble*high quality full range amplifier. The crossovers built into this amplifier allow the user to run a 2-way active speaker setup with no external processing.*Expect only the best from Sundown! * Specifications: 100 x 4 @ 4 ohms 160 x 4 @ 2 ohms 320 x 2 @ 4 ohms bridged Damping Factor > 200 @ 4 Ohms 0.2v - 6v adjustable input sensitivity 10 Hz - 40,000 Hz Frequency Response Channel Separations: 75 dB *> 90 dB S/N Ratio 4-Way Protection Circuit (Thermal, Overload, Speaker Short, and Over Current) Selectable HP / LP / FULL crossover CH 1 & 2 Variable HP crossover 50 - 5000 Hz @ 12 dB CH 1 & 2 Variable LP crossover 50 - 500 Hz @ 12 dB CH 3 & 4 Variable HP crossover 50 - 500 Hz @ 12 dB CH 3 & 4 Variable LP crossover 50 - 5000 Hz @ 12 dB 10 Hz - 500 Hz variable subsonic filter (CH 1&2 and CH 3&4) Subsonic filter allows for band-passed crossover configuration 0 - 18 dB adjustable bass boost 35 - 120 Hz Variable Bass Boost Center Frequency Wired Remote Control unit included 3x 30 Amp Internal Fuses 252(W) x 58(H) x 480(L)mm It has variable crossovers and channels 3-4 may be used for some type of sub.. It also has a gain knob you can mount up front if you use 3-4 like that [/QUOTE]

Verification