Reply to thread

Message: <blockquote data-quote="double 07" data-source="post: 7824704" data-attributes="member: 637354"><p>I had a Mazda truck of that same body style years ago.....I had two RF 12s behind my seat......my box sat on top of the ****** tunnel....I believe it was 52" w x 9" d bottom x 3.5" d top and the height of the seat.....It had one 3" pvc port on each end pointed at the floor ( there is space between it and floor).......then after the box was built I cut a 6" x 6" square out right behind each sub and surface mounted a piece of mdf over the hole....this was done because the back wall of those trucks actually sticks out right in the center above the ****** tunnel.......Cutting out the square and covering it back up on the outer surface of the box gives you a decent mounting depth......</p></blockquote><p></p>

Top