Reply to thread

Message

<blockquote data-quote="aznboinghia" data-source="post: 4159231" data-attributes="member: 587481">Okay i have a setup with2x Digital Deisgn 1508 subswith a custom box enclosure at 1.75cubic feet by 35HZRunning on aJBL GTO7001 AmpPushing at 2ohm makin up to 700rmsSignal from aJVC AVX800Preout amp at 5v700rms /2 = should be roughly 350 rms underated power coming from my JBLPROBLEM!:In order to get get a decent amount of bass. I had to crank my JBL at 75% percent gain. Running 80hz LPF. WHY? .. it should not even be that high to even make the 8&#039;s hit. and These DD are capable are monsterous bass.. To get good bass not very good bass i had to crank it to max.. im scared of clipping my new amp. Please Help =(SOLUTION?: MAYBE!?!Well.. i&#039;m thinking that it may be my wiring.? Could it be? i have a 4gauge running from battery to back. Hook onto a distributer 4gauge in - 2x 8gauge out. But the out - is 2x 4gauge wires push tightly into the 8gauge holes. The wire is extremely stiff. and not sure that may be the problem.. and incrediably sticky inside dont know. i found it :O lol. PLEASE HELP</blockquote>

[QUOTE="aznboinghia, post: 4159231, member: 587481"] Okay i have a setup with 2x Digital Deisgn 1508 subs with a custom box enclosure at 1.75cubic feet by 35HZ Running on a JBL GTO7001 Amp Pushing at 2ohm makin up to 700rms Signal from a JVC AVX800 Preout amp at 5v 700rms /2 = should be roughly 350 rms underated power coming from my JBL PROBLEM!: In order to get get a decent amount of bass. I had to crank my JBL at 75% percent gain. Running 80hz LPF. WHY? .. it should not even be that high to even make the 8's hit. and These DD are capable are monsterous bass.. To get good bass not very good bass i had to crank it to max.. im scared of clipping my new amp. Please Help =( SOLUTION?: MAYBE!?! Well.. i'm thinking that it may be my wiring.? Could it be? i have a 4gauge running from battery to back. Hook onto a distributer 4gauge in - 2x 8gauge out. But the out - is 2x 4gauge wires push tightly into the 8gauge holes. The wire is extremely stiff. and not sure that may be the problem.. and incrediably sticky inside dont know. i found it :O lol. PLEASE HELP [/QUOTE]

Verification