Reply to thread

Message: <blockquote data-quote="ishmir" data-source="post: 36165" data-attributes="member: 543429">hogger,i'm not sure on the displacement question but you should find out on your spec sheet that you got with your subs.  or check jlaudio.com.  and the other question on cutting a 12" hole DO NOT DO THAT!  with your subs you should have also received a round cardboard cut out that is what you should use.  i would hate to see your sub fall in or out of it's enclosure because of a inch or half inch to big of a cut.take your time and you should only have to do it once.//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif</blockquote>

Top