Reply to thread

Message

<blockquote data-quote="michaelking" data-source="post: 5332211" data-attributes="member: 595482">Does this sound like it will match up correctly. And will I be able to heard quite a ways away.(AMP)<a href="http://www.crutchfield.com/p_236TC8001/M..." target="_blank">http://www.crutchfield.com/p_236TC8001/M...</a>(SUB)<a href="http://www.crutchfield.com/p_2067DCVR12/..." target="_blank">http://www.crutchfield.com/p_2067DCVR12/...</a>orshould I buy this amp. I noticed that it&#039;s been discontinued, so I&#039;m not really sure if I would recieve any sort of repair, etc.<a href="http://www.sonicelectronix.com/item_6595..." target="_blank">http://www.sonicelectronix.com/item_6595...</a>Also on the sub I see only one set of speaker outputs that are rated at 2 ohms. The mono amp has two speaker connections (Speaker 1 And Speaker 2), so how would I hook this up? Would I just connect the negative lead from the sub to the amps - input on speaker 1 and the positive lead coming from the sub to the amps + input on speaker 2.(This is a photo of the amp speaker connections)<a href="http://www.crutchfield.com/App/Product/I..." target="_blank">http://www.crutchfield.com/App/Product/I...</a>One more question. Do you guys think I will be fine running the sub amp and another 80 watt x 4 channel amp (Profile AP1040) off of 8 gauge wire? I have a 4 gauge coming from the battery that connects to a dist block and splits off into two 8 gauge wires. I will also replace the 100 amp ANL fuse with a 200 AMP ANL Fuse (Located on power wire).I&#039;m also sorta afraid to run my amp at 2 ohms.</blockquote>

[QUOTE="michaelking, post: 5332211, member: 595482"] Does this sound like it will match up correctly. And will I be able to heard quite a ways away. (AMP) [URL="http://www.crutchfield.com/p_236TC8001/M..."]http://www.crutchfield.com/p_236TC8001/M...[/URL] (SUB) [URL="http://www.crutchfield.com/p_2067DCVR12/..."]http://www.crutchfield.com/p_2067DCVR12/...[/URL] or should I buy this amp. I noticed that it's been discontinued, so I'm not really sure if I would recieve any sort of repair, etc. [URL="http://www.sonicelectronix.com/item_6595..."]http://www.sonicelectronix.com/item_6595...[/URL] Also on the sub I see only one set of speaker outputs that are rated at 2 ohms. The mono amp has two speaker connections (Speaker 1 And Speaker 2), so how would I hook this up? Would I just connect the negative lead from the sub to the amps - input on speaker 1 and the positive lead coming from the sub to the amps + input on speaker 2. (This is a photo of the amp speaker connections) [URL="http://www.crutchfield.com/App/Product/I..."]http://www.crutchfield.com/App/Product/I...[/URL] One more question. Do you guys think I will be fine running the sub amp and another 80 watt x 4 channel amp (Profile AP1040) off of 8 gauge wire? I have a 4 gauge coming from the battery that connects to a dist block and splits off into two 8 gauge wires. I will also replace the 100 amp ANL fuse with a 200 AMP ANL Fuse (Located on power wire). I'm also sorta afraid to run my amp at 2 ohms. [/QUOTE]

Verification