Reply to thread

Message: <blockquote data-quote="Einzee" data-source="post: 536398" data-attributes="member: 556176"><p>If available, get the RCA's from a known working amp and plug them into the non functioning amp.  Got sound?  yes = bad sub amp RCA's : bad output from HU : improper fader settings at HU.  No sound = bad output from amp : bad sub.  Check all connections again.  If it is a DVC sub then make sure you are hooked up in correct phase.  That should get ya a better idea on where to start.</p></blockquote><p></p>

Top