Reply to thread

Message

<blockquote data-quote="Wils91" data-source="post: 1166539" data-attributes="member: 559557">Ok so i&#039;ve been throwing around a setup plan and i have a good idea of what i want but the whole putting into action thing is where i&#039;m having a doubt on if it will actually work.I have an 01&#039; Focus sedan, its got a huge *** trunk. So here in lies my plan.For subs i was thinking about (4) 8 in. RE RE&#039;s ported, maybe 38hz getting 200w each all in seperate chambers firing towards the trunk lid. my max dimensions for this install are28&quot; D40&quot; W11.5&quot; Hthis is going to be my first ported box build, i&#039;ve only done sealed before because of space restraints in my other car.1. will i actually be able to do this kind of install, do you think i have the room?I&#039;ve also been trying to use different ported box calculators and havn&#039;t had much success as they just been giving me dimensions for one giant box for a single 8.I figured out the box dimensions i need with sub displacement according to RE specs. which reccomend a volume of 0.5 cu.ft ported but i havnt been able to figure out how to add a port to those box dimensions simply because i dont know what RE actually calls for so i also cannot calculate for the port in the box too.2.To make a ported box like i want i just simply make a sealed box and add a port right?3. So does anyone know what RE calls for in a port for the RE 8&#039;s because i&#039;m quite sure that i can make plans for the box if i know what size port i need if i&#039;m right in my above question.4. and of course the &quot;how is this going to be in the sq/spl department?&quot;I can&#039;t help but feel oh so noob like asking questions like this, but its simply something i need help on from you guys.-Thanks for any input</blockquote>

[QUOTE="Wils91, post: 1166539, member: 559557"] Ok so i've been throwing around a setup plan and i have a good idea of what i want but the whole putting into action thing is where i'm having a doubt on if it will actually work. I have an 01' Focus sedan, its got a huge *** trunk. So here in lies my plan. For subs i was thinking about (4) 8 in. RE RE's ported, maybe 38hz getting 200w each all in seperate chambers firing towards the trunk lid. my max dimensions for this install are 28" D 40" W 11.5" H this is going to be my first ported box build, i've only done sealed before because of space restraints in my other car. 1. will i actually be able to do this kind of install, do you think i have the room? I've also been trying to use different ported box calculators and havn't had much success as they just been giving me dimensions for one giant box for a single 8. I figured out the box dimensions i need with sub displacement according to RE specs. which reccomend a volume of 0.5 cu.ft ported but i havnt been able to figure out how to add a port to those box dimensions simply because i dont know what RE actually calls for so i also cannot calculate for the port in the box too. 2.To make a ported box like i want i just simply make a sealed box and add a port right? 3. So does anyone know what RE calls for in a port for the RE 8's because i'm quite sure that i can make plans for the box if i know what size port i need if i'm right in my above question. 4. and of course the "how is this going to be in the sq/spl department?" I can't help but feel oh so noob like asking questions like this, but its simply something i need help on from you guys. -Thanks for any input [/QUOTE]

Verification