Reply to thread

Message

<blockquote data-quote="Besbro" data-source="post: 7976544" data-attributes="member: 582064">Hello,My wife bought me a JL Audio CS110-WXv2: Single 10WXv2 BassWedge, Sealed, 4 Ω sub unit for Christmas.&nbsp; It was on sale for only $88.00.&nbsp; I am looking to upgrade the sub but keep the basswedge sealed box.&nbsp; The dimensions of the box are 18.75 in wide, 12.125 in height and 7.75 in deep.&nbsp; My amp puts out 300 watts RMS @ 2 ohms so I am hoping to find a sub in that power range.&nbsp; I am a big Image Dynamics fan, would a IDQ10V3.D2 perform well in this box?&nbsp; I am open to any suggestions although I am hoping to keep the price around or below the $200.00 ish mark.Thanks in advance for any suggestions!I should mention this is going in a 2012 Ford Focus factory deck (was 6 speaker non amplified system from factory) with a Audiocontrol LCQ-1, Image Dynamics CXS comps running off an Arc Audio FD2100 and the sub running off a Cadence XA300.1.Thanks again!</blockquote>

[QUOTE="Besbro, post: 7976544, member: 582064"] Hello, My wife bought me a JL Audio CS110-WXv2: Single 10WXv2 BassWedge, Sealed, 4 Ω sub unit for Christmas. It was on sale for only $88.00. I am looking to upgrade the sub but keep the basswedge sealed box. The dimensions of the box are 18.75 in wide, 12.125 in height and 7.75 in deep. My amp puts out 300 watts RMS @ 2 ohms so I am hoping to find a sub in that power range. I am a big Image Dynamics fan, would a IDQ10V3.D2 perform well in this box? I am open to any suggestions although I am hoping to keep the price around or below the $200.00 ish mark. Thanks in advance for any suggestions! I should mention this is going in a 2012 Ford Focus factory deck (was 6 speaker non amplified system from factory) with a Audiocontrol LCQ-1, Image Dynamics CXS comps running off an Arc Audio FD2100 and the sub running off a Cadence XA300.1. Thanks again! [/QUOTE]

Verification