Reply to thread

Message

<blockquote data-quote="suprag35" data-source="post: 5640043" data-attributes="member: 607582">Ill give you a bump seeing as I have The Exact Same Problem.Alpine iDA-x200 Head Unit connected to the Infinity Basslink using Sub Out RCA connectionIT worked fine at first but after about two weeks The Sub would get loud and distorted for a few socnds pop and not produce sound. The Red Power On Light remains on the servo light is off. If I play around with the head unit settings ie Loudness on crossover freq it will come on but it seems random. I really have no idea I&#039;m guessing mabey the head unit Pre Out Voltage has something to do with it but seeing as the specs are in order I don&#039;t knowBasslink -Input Sensitivity: 50mV – 4V Line-Level Input1V – 16V Universal InterfaceAlpine iDA-x200Maximum Pre-Out Voltage 2v/10k ohmsAny Help Would Be greatly appreciated And The power light remains on so it cannot be ground or power</blockquote>

[QUOTE="suprag35, post: 5640043, member: 607582"] Ill give you a bump seeing as I have The Exact Same Problem. Alpine iDA-x200 Head Unit connected to the Infinity Basslink using Sub Out RCA connection IT worked fine at first but after about two weeks The Sub would get loud and distorted for a few socnds pop and not produce sound. The Red Power On Light remains on the servo light is off. If I play around with the head unit settings ie Loudness on crossover freq it will come on but it seems random. I really have no idea I'm guessing mabey the head unit Pre Out Voltage has something to do with it but seeing as the specs are in order I don't know Basslink - Input Sensitivity: 50mV – 4V Line-Level Input 1V – 16V Universal Interface Alpine iDA-x200 Maximum Pre-Out Voltage 2v/10k ohms Any Help Would Be greatly appreciated And The power light remains on so it cannot be ground or power [/QUOTE]

Verification