Reply to thread

Message: <blockquote data-quote="dbjunior" data-source="post: 8115655" data-attributes="member: 611973"><p>Well I've been looking for a large coil to rebuild my subs,big gap 2.955 pole 3.455 top plate. I found a coil Id 3.00 od 3.434 perfect right. Well here is the weird part its a six layer flatwound dual coil bottom coil 1.4 ohm top coil .7 ohm. How well would this work? I figured I would just wire in series to 2.1 ohm then wire subs together in parallel. Could there be some kind of cancellation if coils were wired in parallel one coil over heating?</p></blockquote><p></p>

Top