Reply to thread

Message

<blockquote data-quote="jmcinvale" data-source="post: 8554811" data-attributes="member: 608668">I have a 20126 Toyota Camry LE with the Entune Audio and I am removing the system from my 2005 CRv and will be putting what I can in the Camry.From the looks of things the radio is fairly integrated with the car so I don&#039;t think I can remove it and use something else.How would I integrate the radio with these components?JBL MS-8 processorJL 300-4V2JL 300-4 internally bridgedJL 500/1 V2I would prefer a line out on the radio itself, but I doubt it has any so that would involve using the speaker level outputs, although given I work in avionics I could possibly add line level outputs controlled by the volume control.Also it has rear deck speakers //content.invisioncic.com/y282845/emoticons/plthumbsdown.gif.d7966af824c93c6021d1aae1778b1c19.gif which I do not like as the left one is always pretty much right behind the driver&#039;s seat.There are also no place in the rear door panels to put any speakers and I doubt the rear doors have any cutouts for speakers.What I want is to replace the stock front door speakers and figure out a way to install rear door speakers if possible or just not use any rear speakers (will do away with one amplifier) and will use the dash tweeters which will be powered from the MS-8 like they are in my CRv.If I do not use the rear deck speakers would removing them allow more bass to be heard inside the vehicle?I&#039;ll be using at first a single JL 12W6V2 sub and seeing if that is enough as I refoamed both subs but the glue on the other didn&#039;t set right in one area and would have to re-do that one before I use it.</blockquote>

[QUOTE="jmcinvale, post: 8554811, member: 608668"] I have a 20126 Toyota Camry LE with the Entune Audio and I am removing the system from my 2005 CRv and will be putting what I can in the Camry. From the looks of things the radio is fairly integrated with the car so I don't think I can remove it and use something else. How would I integrate the radio with these components? JBL MS-8 processor JL 300-4V2 JL 300-4 internally bridged JL 500/1 V2 I would prefer a line out on the radio itself, but I doubt it has any so that would involve using the speaker level outputs, although given I work in avionics I could possibly add line level outputs controlled by the volume control. Also it has rear deck speakers [IMG]//content.invisioncic.com/y282845/emoticons/plthumbsdown.gif.d7966af824c93c6021d1aae1778b1c19.gif[/IMG] which I do not like as the left one is always pretty much right behind the driver's seat. There are also no place in the rear door panels to put any speakers and I doubt the rear doors have any cutouts for speakers. What I want is to replace the stock front door speakers and figure out a way to install rear door speakers if possible or just not use any rear speakers (will do away with one amplifier) and will use the dash tweeters which will be powered from the MS-8 like they are in my CRv. If I do not use the rear deck speakers would removing them allow more bass to be heard inside the vehicle? I'll be using at first a single JL 12W6V2 sub and seeing if that is enough as I refoamed both subs but the glue on the other didn't set right in one area and would have to re-do that one before I use it. [/QUOTE]

Verification