Reply to thread

Message

<blockquote data-quote="djdilliodon!" data-source="post: 8791272" data-attributes="member: 684299">I’m the same way, I could of gotten a truck and just did 4-8 15’s or 18’s but I wanted to do something using only 2 subs. There are always trade offs but the key is to trade off things that aren’t high on the list or comprise in areas that won’t negatively impact the goals. With these subs, the first versions I built i exceeded the limits of the frames so I had to shorten the winding width but that coil worked flawless on the Ti. Had to remove a layer on the spiders as well along with a bunch of other stuff. Then when I thought I was done I changed the cones….. again <img class="smilie smilie--emoji" loading="lazy" alt="😂" title="😂" src="https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f602.png" />. I wanted more efficiency and was able to knock over 100 grams off the weight without sacrificing strength. I bet I can whip something nicely on one of those motors. What sucks is the cost just to make a couple of coils if I have nothing that will work. $150 just for a setup fee then the cost of 3 coils and shipping. It adds up quick lol</blockquote>

[QUOTE="djdilliodon!, post: 8791272, member: 684299"] I’m the same way, I could of gotten a truck and just did 4-8 15’s or 18’s but I wanted to do something using only 2 subs. There are always trade offs but the key is to trade off things that aren’t high on the list or comprise in areas that won’t negatively impact the goals. With these subs, the first versions I built i exceeded the limits of the frames so I had to shorten the winding width but that coil worked flawless on the Ti. Had to remove a layer on the spiders as well along with a bunch of other stuff. Then when I thought I was done I changed the cones….. again 😂. I wanted more efficiency and was able to knock over 100 grams off the weight without sacrificing strength. I bet I can whip something nicely on one of those motors. What sucks is the cost just to make a couple of coils if I have nothing that will work. $150 just for a setup fee then the cost of 3 coils and shipping. It adds up quick lol [/QUOTE]

Verification