Reply to thread

Message: <blockquote data-quote="SPL KID" data-source="post: 6481459" data-attributes="member: 570464">if your organization meters in the center windshield build a common chamber enclosure with a port in the center. Woofers and subs facing the roof. If you meter to the corner pass window then build 4 common chamber port on the drivers side all facing up. Your enclosure should net big enough to use PVC get a 6 inch and cut to length using a box calculator program like found on <a href="http://www.the12volt.com" target="_blank">http://www.the12volt.com</a> for daily tune low like 30-35 Hz or for comps tune to 40-45 Hz. You can always make interchangable ports for either situation.all 4 subs in a 4.5 cube box with a Pvc port tuned to a 4.0 cube box and you will be on point.Nuff Said!</blockquote>

Top