Reply to thread

Message: <blockquote data-quote="mossman8235" data-source="post: 2535220" data-attributes="member: 573006"><p>heres my situation, some might be familiar with it. i am going to be running a ma audio hk4000d and hk398, and a fully loaded 15" Fi BTL. luckily, i will be able to modify my battery tray to be able to fit two yellowtops next to each other. im going to be doing the big 3 as well as upgrade my alternator and add a second yellowtop, all before powering everything up. i already have 1 run of 1/0 gauge going back that i planned on using for the hk4000d and was going to run some 4ga back for the hk398. im not planning on using the full 3700-4000 watts that the 4000d can put out, because the RMS on the STL is only 2000, and i dont want to risk frying it. so my question is, can i just use that run of 1/0 ga for the 4000d and a run of 4ga for the hk398? if so, i plan on fusing the 4000d with a 300A fuse and the 398 with a 125A fuse.</p></blockquote><p></p>

Top