Reply to thread

Message

<blockquote data-quote="West1" data-source="post: 8579879" data-attributes="member: 586208">I took out my rear 6x9s and played them individually, each sound good and read 4ohm on a mm. I do not have components, straight amp to 6x9. Rear is 2 pioneer 5 way coaxel and front is 2 xs 6x9 image dynamics. Something is up with my wiring so I am running new 12ga knukonceptz as we speak. Im just going to run new wire to all 4 speakers. The current wire I have assuming basic 16ga from a local shop. Also noticed my rear passenger side has this nice 16ga from amp to door but stock wire from 6x9 to door. Luckily I purchased like 30 extra feet of 12ga for my brother.I do plan to replace the pioneers soon.You could be correct on the xover as I am not sure how to set it. I&#039;ll take a look once I finish wiring everything but I usually set everything with med bass from mid. I let my sub do the lows.(just looked at xover, its on FULL for mids and Lows is set to Low)Sorry for the late reply, I thought I would receive a notification if someone replied to my thread. I just use my home page which is the F/S section:nerd:Im pretty sure my battery is good. It is an XS power 3400dNot a bad ground and not bad rcas. I have no static noise and amps grounded to chasis about 1.5&#039; away. I believe its my wiring from the shop I used a couple years ago. Maybe just old wire, who knows.</blockquote>

[QUOTE="West1, post: 8579879, member: 586208"] I took out my rear 6x9s and played them individually, each sound good and read 4ohm on a mm. I do not have components, straight amp to 6x9. Rear is 2 pioneer 5 way coaxel and front is 2 xs 6x9 image dynamics. Something is up with my wiring so I am running new 12ga knukonceptz as we speak. Im just going to run new wire to all 4 speakers. The current wire I have assuming basic 16ga from a local shop. Also noticed my rear passenger side has this nice 16ga from amp to door but stock wire from 6x9 to door. Luckily I purchased like 30 extra feet of 12ga for my brother. I do plan to replace the pioneers soon. You could be correct on the xover as I am not sure how to set it. I'll take a look once I finish wiring everything but I usually set everything with med bass from mid. I let my sub do the lows. (just looked at xover, its on FULL for mids and Lows is set to Low) Sorry for the late reply, I thought I would receive a notification if someone replied to my thread. I just use my home page which is the F/S section:nerd: Im pretty sure my battery is good. It is an XS power 3400d Not a bad ground and not bad rcas. I have no static noise and amps grounded to chasis about 1.5' away. I believe its my wiring from the shop I used a couple years ago. Maybe just old wire, who knows. [/QUOTE]

Verification