Reply to thread

Message

<blockquote data-quote="Prowler573" data-source="post: 1452139" data-attributes="member: 561023">Yes, provided that the overall nominal impedence load presented to the amplifier is a load the unit is capable of sustaining. I ran 4 speakers off of a two channel amp in an old Buick I had for several months with no issues. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gifSo long as the final nominal impedence created by wiring however many speakers you&#039;re going to use off of each channel is 2 Ohms and the amp in question is stable at a 2 Ohm load, yes.No, it won&#039;t. Seeing as you&#039;re not going to be inputting 4 discrete channels of input you will not have the ability to fade between front and rear. Other than that (refer to previous answers) as long as you don&#039;t tax the amplifier beyond its ability to safely operate it should work just fine.Are you talking about two sets of components being driven with a two channel amp? As in 4 mids, 4 tweeters, and 4 passive crossover modules? Two sets on each channel? Or are you talking about 4 separate drivers...two being mids and two being tweeters?</blockquote>

[QUOTE="Prowler573, post: 1452139, member: 561023"] Yes, provided that the overall nominal impedence load presented to the amplifier is a load the unit is capable of sustaining. I ran 4 speakers off of a two channel amp in an old Buick I had for several months with no issues. [IMG]//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif[/IMG] So long as the final nominal impedence created by wiring however many speakers you're going to use off of each channel is 2 Ohms and the amp in question is stable at a 2 Ohm load, yes. No, it won't. Seeing as you're not going to be inputting 4 discrete channels of input you will not have the ability to fade between front and rear. Other than that (refer to previous answers) as long as you don't tax the amplifier beyond its ability to safely operate it should work just fine. Are you talking about two [B]sets[/B] of components being driven with a two channel amp? As in 4 mids, 4 tweeters, and 4 passive crossover modules? Two [B]sets[/B] on each channel? Or are you talking about 4 separate drivers...two being mids and two being tweeters? [/QUOTE]

Verification